Showing all 5 results
WCB6LT
WCB6LT Specification Transducer Condenser Polar Pattern Omnidirectional Frequency Response 20Hz to 20kHz +/- 3dB Dynamic Range Not Specified by Manufacturer Signal-to-Noise Ratio 24dB(A) Maximum Input Sound Level 120dB Power Requirements Operating Current: 500uA Operating Voltage: 1 to 2V Power Supply Voltage: +3V with 2.7k ohm Load +5V with 6.8k ohm
WL 184
Type: Condenser (electret bias) Frequency Response: 50 to 20,000 Hz Polar Pattern: Omnidirectional, uniform with frequency Output Impedance: 3000 Ù Sensitivity: -38 dBV/Pa (1 Pa = 94 dB SPL) Maximum Sound Pressure Level: 120 dB SPL Dynamic Range: 102 dB Output Noise (A-weighted): 18 dB SPL Polarity: Positive pressure on
WL 185
Type: Condenser (electret bias) Frequency Response: 50 to 17,000 Hz Polar Patterns (at 1 kHz): (see below) Output Impedance : 1800 Ù Sensitivity (1 Pa = 94 dB SPL): ………..WL183: -40.0 dBV/Pa ………………………………………………………WL184: -44.5 dBV/Pa ………………………………………………………WL185: -45.5 dBV/Pa Maximum Sound Pressure Level:……WL183: 125.0 dB SPL ……………………………………………………..WL184: 129.5 dB SPL ……………………………………………………..WL185:
WL 93
WL 93 Specification Transducer Electret Condenser Polar Pattern Omnidirectional Frequency Response 80 Hz – 20 kHz Dynamic Range (Typical) 98dB @ Max. SPL, A-Weighted Signal-to-Noise Ratio 72dB Maximum Input Sound Level 120dB @ 1 kHz,(1% THD) Power Requirements 2 to 10v; 5v Nominal (Pin 2 to Pins 3 and 4)