Friend Electronic Myanmar

Product categories

Product Brands

Product Series

Grid List

Showing 349–360 of 856 results

Sort By

Quick View

IR-820SP

Specification Power Source 24 V DC (supplied from IR-802T) Power Consumption 4.4 W (based on UL standards) Rated Output 20 W Frequency Response 100 Hz – 20 kHz (-10 dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling.) Amplification

Quick View

JK2

JK 2 Specification Sheet System Acoustic Performance -1dB Response 10Hz to 40kHz Dynamic Range >130dB Total Harmonic Distortion <0.005% Signal Input Input Channels 2x 1/4″ Jack + 2x RCA Input Impedance 2x 1MΩ / 10KΩ Max. Input voltage 1V / 5V / 20V peak Signal Output Signal Output Channels 2x

Quick View

JP-028B

Specification Power Source 220 – 240 V AC, 50/60 Hz Power Consumption 16 W AC Power Output Switched: 20 A max. × 13 Unswitched: 10 A max. × 5 DC Power Output 24 V DC, 0.2 A Finish Panel: Surface-treated steel plate, black, 30% gloss, paint Dimensions 483 (W)

Quick View

JP-1216

Specification Line Terminals 8 lines (for signal lines only) Speaker Terminals 16 lines, 100 V 15 A Finish Front panel : black Dimensions (W×H×D) 482.6(19.00″) × 88.4(3.48″) × 301(11.85″) mm Weight 3.7 kg (8.16 lb.) Accessories Rack mounting screws……4

Quick View

K 10

K Series Specifications K8 K10 K12 KSub Configuration Trapezoidal 2-way Multipurpose 2-way Multipurpose 2-way 4th Order Bandpass Transducers Low-frequency 8″ cone transducer 10″ cone transducer 12″ cone transducer 2 x 12″ cone transducers High-frequency 1.75″ diaphragm compression driver 1.75″ diaphragm compression driver 1.75″ diaphragm compression driver Frequency Response

Quick View

K 12

Quick View

K 8

Quick View

KSM 141-SL

Cartridge Type Electret Condenser Frequency Response 20 to 20,000 Hz Output Impedance 150 ohms (actual) Power Requirements 48 Vdc phantom, 4.7 mA Common Mode Rejection >50 dB, 50 Hz to 20 kHz Polarity Positive pressure on front diaphragm produces positive voltage on output pin 2 relative to pin 3

Quick View

KSM 8

Cartridge Type Dual-Diaphragm Dynamic (moving coil) Frequency Response 40 to 16,000 Hz Polar Pattern Cardioid Output Impedance 300 ohms Sensitivity at 1 kHz, open circuit voltage -51.5 dBV/Pa (1.85 mV) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Net Weight 330

Quick View

KSM 9 HS

Type Condenser (Electret Biased) Frequency Response 50 to 20,000 Hz Polar Pattern Hypercardioid and Subcardioid Phantom power required? 48 Vdc +/- 4 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3 KSM9 HS Specification

Quick View

KSM137 SL

KSM 137 Specification Cartridge Type Electret Condenser Polar Pattern Cardioid Frequency Response 20 to 20,000 Hz Senstivity Open circuit voltage, @ 1 kHz, typical -37 dBV/Pa (14.1 mV) 1 Pa = 94 dB SPL Maximum SPL(1 kHz @ 1% THD) No Pad 145 dB 139 dB 134 dB

Quick View

KSM9 CG

KSM9 Specification Cartridge Type Condenser (Electret Biased) Frequency Response 50 to 20,000 Hz Output Impedance 150 ohms (actual) Phantom Power 48 Vdc ± 4 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3 Current Drain 5.2 mA typical at 48 Vdc Common Mode Rejection >60 dB, 50 Hz to 20

IR-820SP

IR-820SP

JK2

JK2

JP-028B

JP-028B

JP-1216

JP-1216

K 10

K 10

K 12

K 12

K 8

K 8

KSM 141-SL

KSM 141-SL

KSM 8

KSM 8

KSM 9 HS

KSM 9 HS

KSM137 SL

KSM137 SL

KSM9 CG

KSM9 CG

Contact Us

Follow Us